Crank Shaft Grinding Wheels

  • Crank Shaft grinding is the cylindrical grinding of the crank pin or bearing by plunge form method. Normal speed of operation: 33 to 45 MPS.
  • Sterling’s crankshaft wheels grind freely, generate minimum heat and at the same time maintain its form and size for a sufficient length of time. It is used by all types of crank shaft manufacturers and regrinding industry.
  • Suitable for machines like Landis, Riat, Norton, Naxos Union, Newall, Churchill, Parishudh etc.

International Range

  • Good form retention.
  • Lower cycle time, Higher productivity.
  • Cool cutting, Crack free components.
  • High stock removal.

Premium Range

  • Good dimensional accuracy
  • Lower dressing frequency
  • No surface crack
Application

Recommendation

Type of Material Professional Range Premium Range International Range
Forged Steel – Soft AA63 L5 V5C DAA63 L5 V5C AA463 L5 V5C
Forged Steel – Hard A601 K5 V5C DA601 K5 V5C AA601 K5 V5C
Cast Iron   DA463 L5 V5C  
Nodular Iron DA543 L5 V5C AA543 L5 VC11 PAA543 K5 V5C
SG IRON DA543 K5 V5C AA543 K5 V5C PAA543 K5 V5C
‎Commonly Used Sizes (In mm)

Commonly Used Sizes (In mm)

660.4 X 22.23 X 152.4 812 X 25.4 X 203.2
660.4 X 22.23/32.3/40 X 203.2 900 X 38.1 X 304.8
711.2 X 25/32/38 X 203.2 914 X 25.4 X 304.8
762 X 25 X 203.2 1060 X 32.5 X 304.8

Crank Shaft

Application